Software

Hardware

  • Construction 
  • Cubicost 
  • Cubicost Takeoff for Rebar

Glodon Takeoff for Rebar


A BIM quantity takeoff software used by quantity surveyors for measuring quantities of rebar. TRB can calculate and display every single rebar in each element. Two modules available for different purposes: tender and pre-fabrication.
 
สามารถติดต่อชมการสาธิตการใช้โปรแกรมได้ที่บริษัท ทูพลัส ซอฟท์ จำกัด หรือ ติดต่อฝ่ายขาย 02 513 7495-99



Efficient

 

● Finish measurement work by modeling instead of by excel or by hand
● Rapid modeling from *.DWG
 


 

● Rapid calculation after variation from drawings

● Model-sharing between TRB and TAS for collaboration work
 
 

Precise

 

● Built-in localized calculation rules as in different markets, e.g. CP97, SMM2, SMM4, SMM7, ACI, etc.
 

 
● Customized calculation settings as needed
 

 
● 3D model for precise deduction calculation
 

 
●  Precise calculation with special structure by built-in algorithm
 

 
● Traceable expressions for each element

 

 

Easy

 

●  Flexible reporting system
 

 
●  Convertible between tender mode and pre-fabrication modes for different purposes
 

 
●  Convenient in auditing results
 

  

 

●  Quickly handle variation orders

●  Export pre-fabrication rebar schedule for on-site guidance

 





Building type : Mixed Development
Location : Subang

Numbers of floors :
Tower (A) - 52
Tower (B) - 28

Using TAS made easy :
  • Fast in copying elements to other similar floors,
   entails only modification on gradually changing elements.



Building type : Mixed Development
Location : Petaling Jaya

Numbers of floors :
Tower (A) - 40
Tower (B) - 23

Using TAS made easy :
  • Area setting in TAS allows users to separate measurements into 2 or
  more areas with different numbers of floors, floor height and elevations.



Building type : Commercial
Location : Singapore

Numbers of floors : 7

Using TAS made easy :
  • Spiral ramp easily created;
   enabled user to generate accurate concrete & formwork quantity
  • peeded up measurement process (3 times more efficient than conventional
   measuring method



Building type : Residential
Location : Subang

Numbers of floors : 15

Using TAS made easy :
  • Fast in copying elements to other typical floors.
  • Curved exterior walls are easily created;
   enabled user to generate accurate wall & floor area.
.



Building type : Religious
Location : Mont Kiara

Numbers of floors : 5

Using TAS made easy :
  • Slanted roof easily created; enabled user to generate accurate roof area.
  • Curved RC wall easily created; enabled user to generate accurate concrete &
   formwork quantity.



Building type : Residential
Location : Rawang

Numbers of floors : 2 1/2

Using TAS made easy :
  • Fast in measuring room finishes by using room pointing method.
  • Different types of wall tiles with various height easily created; enabled
   user to generate accurate finishes quantity.



Building type : Residential
Location : Kuala Lumpur

Numbers of floors : 13

Using TAS made easy :
  • TAS allows users to 'Auto Generate Earth Excavation' after creating
   foundation elements.
  • Other than 'Auto Identifies superstructure elements,
   TAS enabled user to 'Auto identifies' pile cap.



Building type : Reservoir
Location : Klang

Numbers of floors : 5

Using TAS made easy :
  • Creating staircase made easy using Parameterization Staircase provided
   in TAS; user only need to insert integral information.


  • Contact Us
    0 2513 7495
    • ชุตินันท์ โนพันธ์


      (นัท)


      02 513 7495-99 # 104


      086-3220766


      chutinun@twoplussoft.com